Click on the table headings below to sort by column.
| Component |
ID |
Description |
| Excel Add-in |
53893 |
When pasting a View in the Excel Add-in using the Palo.DataV data function, the number of supported dimensions in the POV section is reduced to approximately 6 to 10 dimensions (depending on the length of the element names). This happens because of the following Excel bug:
- FormulaArrays support up to 255 characters.
However, to overcome this issue the following workaround can be applied:
After pasting the view usually, the 1st cell of the view is displayed, this can be used to manually recreate the array formula in four steps:
1. make sure the whole view data area is selected.
2. Press F2
3. Delete the @ symbol of the formula
3. Press CTRL-SHIFT-ENTER " |
| Excel Add-in |
44557 |
In Excel for Office 365, pasting a subset into a single cell and then expanding it over a range of cells as an array doesn't work due to a recent change in Excel functionality, which inserts an @ into formulas. Workaround: after expanding the cell range, remove the @ operator manually from the formula and press CTRL-SHIFT-ENTER. |
| In-Memory DB |
55458 |
Using a List in a View doesn't work correctly if the List name uses only numeric characters. |
| Integrator |
55562 |
Using a Directory connection with FTP or WebDav targets doesn't work as expected. |
| Jedox Mobile |
41728 |
Web reports do not scale down properly on Android devices. |
| Jedox Mobile |
42066 |
When tapping the "Clear cache" button in Settings, there is no visual feedback to indicate that the cache was cleared. |
| Jedox Mobile |
43584 |
The "Download" icon for PDF documents is not correctly shown on IPad devices. |
| Jedox Mobile |
45511 |
If zooming is disabled in the first report opened in the Jedox Plan and Forecast mobile app, all subsequently opened reports will also have zooming disabled. |
| Jedox Web |
18919 |
The database access rights from cube #_GROUP_DATABASE_DATA are not yet fully utilized in Jedox Web. |
| Jedox Web |
16837 |
When using a recursive named range (i.e. named range that refers to itself), Spreadsheet Server can become unstable. |
| Jedox Web |
49949 |
When using vertical merged cells, the height of the merged cell is sometimes displayed incorrectly inside of a Canvas. |
| Jedox Web |
50051 |
In 21.2, when changing the selection in a Combobox on which data for a chart in a Canvas sheet depends, the Chart is not always updated correctly. |
| Jedox Web |
50220 |
When using PHP7 for the Jedox Web Macro Engine, Macros attached to Comboboxes aren't working correctly in Jedox Web 21.3. |
| Jedox Web |
50288 |
When using a display scale factor, or browser zoom, which is not equivalent to 100%, reports using colored cell backgrounds over ranges of cells sometimes show visible white lines even if no cell borders are defined. Workaround: adjust the display scaling / browser zooming. |
| Jedox Web |
50630 |
Pasting a view from cubes which contain an double-quote character in the cube name fails in Jedox 21.1. |
| Jedox Web |
50996 |
If a View is created using the "DATAX" function, the function of the View cannot be properly changed when used in Jedox Web. |
| Jedox Web |
52211 |
When using the "Cyclic list" option in a stored subset, this option is not retained when later editing the stored subset. |
| Jedox Web |
52325 |
Creating a PDF of a Canvas which uses merged cells doesn't always work as expected. |
| Jedox Web |
52454 |
When starting to edit a cell value in a Web spreadsheet by using a non-latin character, this character is not entered correctly. |
| Jedox Web |
52662 |
When using Safari browser, copying multiple cells from Excel and pasting them in a Jedox Web report doesn't always work as expected. |
| Jedox Web |
53177 |
For users with restricted access to elements in a dimension, the expand / collapse operation in modeler doesn't always work correctly on that dimension. |
| Jedox Web |
53347 |
When closing a Workbook with a Hyperlink Action on the "close" event, while that workbook is in the background, the Action isn't properly executed. |
| Jedox Web |
53400 |
In a frameset, an Action defined on the "Close" event for one of the Frameset's workbooks will execute only if the mouse cursor was last position in the frame where the event is defined in Jedox Web 22.1. |
| Jedox Web |
53968 |
The navigation breadcrumb in Jedox Web does not show the correct folder path for a homepage report initially. |
| Jedox Web |
54361 |
The handling of static value sources in the "Set value" action isn't as expected for some specific value types, such as "true" or "false". Workaround: use the source type "range". |
| Jedox Web |
54384 |
When copying / pasting a chart to which a Hyperlink had been added, the Hyperlink isn't present on the pasted chart. |
| Jedox Web |
54954 |
Combining a Hyperlink Action with a subsequent Action which uses a Confirmation dialog doesn't work correctly. |
| Jedox Web |
43883 |
Disabling the mail notifications on Scheduler Tasks which were created in Jedox version prior to 2019.* doesn't always work correctly. |
| Jedox Web |
44618 |
When rebuilding a View in a Web Spreadsheet, a DynaRange in the same sheet cannot be removed. |
| Jedox Web |
44633 |
After renaming an Integrator project, a file with the old name remains in the recent file list. Clicking on the file leads to a FlowGraph error. |
| Jedox Web |
46267 |
Using the "Upload" action to upload .wss files doesn't work correctly. |
| Jedox Web |
46433 |
When uploading a file on a dimension in Modeler, changing the level assignment of an attribute doesn't work correctly on the first attempt. |
| Jedox Web |
46877 |
When setting a style class on an unlocked spreadsheet cell in Jedox Web, the icon indicating the unlocked state in reports mode is not shown anymore. |
| Jedox Web |
46985 |
When importing a file via the context menu on a root folder in Jedox Web Designer, and a file with the same name exists, the handling for replacing the existing file is not correct. |
| Jedox Web |
48959 |
When selecting multiple elements in Modeler and trying to change the parent element for the selected elements, the new parent cannot always be selected correctly in the dropdown in Jedox Web 21.2. |
| Jedox Web |
49265 |
Creating rules for elements with a single quote character in the element name doesn't work correctly in Jedox Web. |
| Jedox Web |
49484 |
When a Canvas is used inside of a model which is installed in a namespace, the Canvas content is not fetched correctly. |
| Jedox Web |
39215 |
When setting a minimum + maximum value for the horizontal Axis scaling in the "Vertical Waterfall" Success Chart, the chart is not rendered correctly. |
| Jedox Web |
39385 |
When axis labels in charts are wrapped to multiple lines, they appear in PDFs as a single line and partially overlap. |
| Jedox Web |
41192 |
Enabling Designer Preview on a workbook with DynaRanges or the preview option in Paste View logs a false-positive workbook load message in the log file of Spreadsheet Server. |
| Jedox Web |
41651 |
When exporting and importing an XLSX file containing a bubble chart, the chart does not display properly due to incorrect interpretation of the data source. Workaround: after an XLSX import, set the data source again. |
| Jedox Web |
42197 |
In languages Finish, Danish and Turkish, a Checkbox in a Web Spreadsheet which is linked to an @variable does not initialize the its value correctly when a report is opened. |
| Jedox Web |
42321 |
The Undo functionality does not work properly after switching between the elements of a ComboBox. |
| Jedox Web |
42336 |
In some scenarios, Dynamic styles are incorrectly displayed in a report with unlocked cells. |
| Jedox Web |
42662 |
Using ad hoc calculations for the Header dimensions of a View doesn't work correctly when a stored subset is set for the dimension. |
| Jedox Web |
43525 |
In the navigation tree in Jedox Web Designer, files cannot be dragged and dropped into the parent folder of their current location. |
| Jedox Web |
43539 |
For Button form elements in Web spreadsheets, the "No color" option in color picker does not work as expected. |
| Jedox Web |
33373 |
When a user belongs to multiple groups with different access rights to Folders in Report Hierarchies, the user rights are not correctly applied after setting them the first time. Workaround: when re-setting the user right, it is correctly stored. |
| Jedox Web |
36657 |
When copying a cell containing a Data Validation and pasting it on a different sheet, the Data Validation does not work correctly. |
| Jedox Web |
27957 |
Web spreadsheet size increases after inserting cells in specific scenarios. |
| Supervision-Server |
44317 |
If all workers are occupied AND "use-dimension-worker" is enabled, workbooks cannot be created or opened in Designer and an error message ("Unable to load workbook") is thrown. |
Click on the table headings below to sort by column.
| Component |
ID |
Description |
Status |
Fixed In |
| Excel Add-in |
49758 |
In Jedox 21.2, closing Excel can take longer than usual if the option "Clear cache when closing Excel" is enabled. |
Fixed |
22.1.0 |
| Excel Add-in |
50181 |
Connecting to a Jedox server in Jedox Excel Add-in doesn't always work correctly if multiple active SAML connections exist. |
Fixed |
20.4.9, 21.1.6, 21.2.3, 21.3.0 |
| Excel Add-in |
50310 |
In Excel Add-in: when writing back to a PALO.DATA formula where coordinates are omitted, the writeback operation is executed against the default read element instead of the default write element when both default elements are defined in dimension properties. |
Fixed |
21.3.0 |
| Excel Add-in |
50562 |
When defining an Undo Lock on a spreadsheet cell containing a PALO.DATA*() function where not all coordinates are explicitly specified as function arguments, the Lock isn't set on the correct cube area. |
Fixed |
21.4.0 |
| Excel Add-in |
50631 |
Pasting a view from cubes which contain a double quote character in the cube name fails. |
Fixed |
21.3.0 |
| Excel Add-in |
51392 |
When editing a Paste View with an element containing letters with umlaut (ä,ö,ü), these characters break and the element jumps to the top-level element. |
Fixed |
21.1.13, 21.2.11, 21.3.3, 21.4.0 |
| Excel Add-in |
53288 |
On displays using scaling factors other than 100%, pasted Views which set a non-default row-height through the View theme or an element format are not always displayed correctly. |
Fixed |
22.3.0 |
| Excel Add-in |
42343 |
In some scenarios, a Lost UI error message is displayed in the log. This error message has no impact on the performance. |
Fixed |
21.2.0 |
| Excel Add-in |
45797 |
Resolving variables in a subset doesn't work correctly if the connection names used in Jedox Excel Add-In and Jedox Web don't are identical. |
Fixed |
21.4.0 |
| Excel Add-in |
47741 |
When creating server connections in Excel Add-in, testing a connection is possible even if no username is set when using Jedox Authentication. |
Fixed |
22.2.0 |
| Excel Add-in |
47877 |
When detaching a View which uses the "Analyze (Grid)" View theme, the result is not correct. |
Fixed |
21.1.0 |
| Excel Add-in |
48064 |
In Jedox Excel Add-in 20.4, the connection timeout defined in the Add-in options dialog can incorrectly interrupt In-Memory DB calculations that exceed the timeout. Workaround: increase the value for Connection Timeout setting in the Options dialog. |
Fixed |
21.2.0 |
| In-Memory DB |
52416 |
The calculation of DFilter in a subset doesn't work correctly from Excel Add-in if one of the arguments for PALO.SUBCUBE refers to a spreadsheet cell containing a PALO.ESELECT function that displays an Alias. |
Fixed |
21.3.3, 21.4.1, 22.1.0 |
| In-Memory DB |
48477 |
When pasting a stored view, where the cube layout was changed after the view was stored and lists are used in the view, Jedox In-Memory DB can become unstable. |
Fixed |
21.2.0 |
| In-Memory DB |
47698 |
Changes to cube cells of type "string" made via regular Integrator Cube loads are incorrectly logged in the Audit dataset. |
Fixed |
21.2.0 |
| In-Memory DB |
48000 |
Elements that are between two limits defined in Data Filter in a subset are not displaying values |
Fixed |
20.3.4, 20.4.1, 21.1.0 |
| In-Memory DB |
48403 |
If a Cube rule returns a constant numeric value with 10 digits, the result of the calculation is not correct. |
Fixed |
21.2.0 |
| In-Memory DB |
48509 |
The "zip-backup" configuration key in palo.ini is not correctly used when database backups are created. |
Fixed |
21.2.0 |
| In-Memory DB |
49144 |
Access to data in databases where at least one element-specific format has been defined doesn't work for users whose user role has "N" access on the "user info" rights object in Jedox 21.1. Workaround: increase the role's right on the "user info" object to "R". |
Fixed |
21.1.2, 21.2.0 |
| In-Memory DB |
50063 |
Access to some data in the User Properties cube in the System database incorrectly requires at least the role right "R" on the "password" right object. |
Fixed |
21.3.0 |
| In-Memory DB |
50134 |
When omitting dimensions from a View by not adding them to the POV, rows, or columns of the view, direct cell writeback on the view doesn't work if no default write elements are specified for these dimensions. |
Fixed |
21.3.0 |
| In-Memory DB |
50561 |
Pasting a view from cubes which contain an ampersand character in the cube name fails in Jedox 21.2. |
Fixed |
21.2.3, 21.3.0 |
| In-Memory DB |
50988 |
Writeback using the "Reallocate" mode doesn't work correctly in scenarios where default dimension elements are defined in Jedox 21.3. |
Fixed |
21.3.1, 21.3.3, 21.3.4, 21.4.0 |
| In-Memory DB |
51112 |
Changing the type of a dimension element in an In-Memory DB Script doesn't work correctly if the element was created in a previous command in the same script in Jedox 21.3. |
Fixed |
21.2.4, 21.3.1, 21.4.0 |
| In-Memory DB |
51235 |
The "transfer" planning function doesn't work correctly when specifying elements from a Virtual Dimension in the input. |
Fixed |
22.2.0 |
| In-Memory DB |
51331 |
Some rules are not calculated as expected when accessing data from Virtual Dimensions. This also affects the use of calculated members in the POV area of a View when selecting multiple elements. |
Fixed |
22.1.0 |
| In-Memory DB |
51513 |
Some "bulk" operations, such as the deletion of a large number of elements in an Integrator job, take longer to complete if Virtual Dimensions are enabled. |
Fixed |
21.4.3, 22.1.0 |
| In-Memory DB |
52006 |
If a cube uses Virtual Dimensions, the content of String cells is not shown correctly in Jedox Views. |
Fixed |
22.1.0 |
| In-Memory DB |
53200 |
The string "nan" can be entered on numeric base cells in Jedox In-Memory DB cubes. |
Fixed |
22.2.0 |
| In-Memory DB |
55565 |
If a Supervision Server script reads a cube cell value which was modified earlier as part of the same script, the value is not retrieved correctly in version 22.2. |
Fixed |
22.2.5, 22.3.0 |
| Integrator |
55774 |
When using a Status Dialog in an Integrator Action, the dialog doesn't always correctly detect when a Job execution has finished in Jedox 22.3. |
Fixed |
22.3.1, 22.4.0 |
| Integrator |
47543 |
In Dimension loads using the mode "InsertParallel", if a child element already had multiple parents before the Dimension load, in Jedox Integrator 20.3 the new consolidations of the source data have precedence over the existing consolidations in the dimension. |
Fixed |
20.3.10, 20.3.11, 20.4.1, 21.1.0 |
| Integrator |
48433 |
In Jedox Integrator, numeric values which have trailing whitespaces in a data source (e.g. a csv file) are not correctly handled, leading to an error message regarding failed value conversion. |
Fixed |
21.3.0 |
| Integrator |
48427 |
In Integrator TreeFH transforms in version 20.4, if an element occurs on multiple levels, a warning message is incorrectly raised. |
Fixed |
20.4.5, 21.1.0 |
| Integrator |
49599 |
When opening the "Drillthrough" section for a cube without Drillthrough data in Modeler, an error is shown. |
Fixed |
21.1.4, 21.2.0 |
| Integrator |
50339 |
On Integrator projects with an underscore character in the project name, Variables with the source "Settings" are not set correctly in Jedox 21.2. |
Fixed |
21.2.5, 21.3.0 |
| Integrator |
50896 |
When using the "All output columns" option on a TableJoin, an error is raised in Jedox 21.2 if the joined tables contain columns with identical names. |
Fixed |
21.2.9, 21.3.3, 21.4.0 |
| Integrator |
51166 |
Starting Integrator jobs from a project containing space characters via a Web spreadsheet Macro doesn't work correctly in Jedox 21.3. Workaround: use the soap-based version of the Integrator macro library instead of the default library. |
Fixed |
21.3.2, 21.4.0 |
| Integrator |
51397 |
When using explicit caching in more than 5 sources (extracts or transforms) in 21.3 and the cached values are used in a Parallel or LoopParallel job, the execution of the job can fail. The error message indicates a premature closing of the internal connection: "The database has been closed". |
Fixed |
21.3.8, 21.4.0 |
| Integrator |
52306 |
The lookup of Drillthrough data via Integrator does not work, if the character case of element names in the In-Memory database, and the Drillthrough source data is not identical. |
Fixed |
22.1.0 |
| Integrator |
53832 |
When drillthrough to an Integrator source is executed in Jedox 21.3 or newer on a cube cell that currently returns an empty value (from the cell itself, or a rule), the drillthrough result is empty, even if the drillthrough source contains data. |
Fixed |
22.3.0 |
| Integrator |
54730 |
An error is incorrectly raised in file extracts in Integrator version 22.2, if the query definition for the extract consists of a single space character. |
Fixed |
22.2.2, 22.3.0 |
| Jedox Mobile |
47889 |
When enabling the "secure cookies" configuration in Jedox Web, communication of the Jedox Plan and Forecast app with the Jedox server doesn't work correctly. |
Fixed |
21.4.0 |
| Jedox Web |
21902 |
If the data source for a chart is dynamic (e.g. based on @variables), the chart may not initialize with correct settings and formatting in all cases. Workaround: manually define the options for data structure in "Source Data" dialog. |
Fixed |
21.4.0 |
| Jedox Web |
55745 |
If a Hyperlink is used in a Frameset for navigating from a Workbook with a single worksheet, to a workbook with multiple worksheets, the sheet selector isn't correctly shown even if the option is enabled on the frameset in Jedox Web 22.1.4. |
Fixed |
22.1.7, 22.2.5, 22.3.0 |
| Jedox Web |
55848 |
In Jedox Web 22.3, doing arithmetic calculations in spreadsheets using the result of a function which returns a string (including PALO.DATA* functions) doesn't work correctly. Workaround: use a VALUE() function around the function which returns the string value. |
Fixed |
22.3.1, 22.4.0 |
| Jedox Web |
49676 |
When using a List with formula expressions in a Jedox View, changing elements in the View POV section doesn't work correctly in Jedox 21.2. |
Fixed |
22.2.0 |
| Jedox Web |
49786 |
In Jedox Web, Model Settings of type "password" are not stored correctly when editing their value. |
Fixed |
21.1.10, 21.2.0 |
| Jedox Web |
49789 |
When trying to change properties of a Chart for which data (rows or columns) was previously deleted from its source range, Jedox Web UI doesn't function correctly anymore. |
Fixed |
21.4.0 |
| Jedox Web |
49813 |
The function CELL() doesn't return the correct result, if another formula is used for its second argument. |
Fixed |
22.3.0 |
| Jedox Web |
49869 |
In Jedox 21.2, on Canvas sheets, usage of content from a source worksheet which uses non-alphabetic characters in the sheet name doesn't work correctly. Workaround: rename the source worksheet. |
Fixed |
21.3.0 |
| Jedox Web |
49963 |
If Autosave files are generated on Web reports for users which have special characters such as "@" in their username, the autosave files can later not be selected correctly. |
Fixed |
21.2.2, 21.4.0 |
| Jedox Web |
49963 |
If Autosave files are generated on Web reports for users which have special characters such as "@" in their username, the autosave files can later not be selected correctly. |
Fixed |
21.1.13, 21.2.13, 21.3.4, 21.4.0 |
| Jedox Web |
49992 |
In Jedox 21.2, when closing an empty Canvas sheet, interaction with the UI becomes unstable. |
Fixed |
21.2.1, 21.3.0 |
| Jedox Web |
50075 |
Transferring values via the HPYERLINK() function to a different worksheet doesn't work properly in Jedox Web 21.2. |
Fixed |
21.2.4, 21.3.0 |
| Jedox Web |
50077 |
In Jedox 21.2, during execution of Integrator jobs, the Execution Monitor doesn't show the correct relationship between jobs correctly in all cases. |
Fixed |
21.2.3, 21.3.0 |
| Jedox Web |
50086 |
Editing a subset which uses a variable for the connection/database parameter doesn't work correctly in the Subset Editor in Jedox Web 21.2. |
Fixed |
21.2.3, 21.3.0 |
| Jedox Web |
50174 |
Loading Web reports from 21.2 Jedox environments doesn't work properly in the Jedox Plan and Forecast mobile application. |
Fixed |
21.2.1, 21.3.0 |
| Jedox Web |
50175 |
When adding an empty frame object to a Canvas, the prompt to save changes isn't shown when closing the workbook tab. |
Fixed |
21.4.5, 22.1.0 |
| Jedox Web |
50275 |
When searching in a ComboBox in a Web report, no horizontal scroll bar is shown for longer result strings. |
Fixed |
22.1.0 |
| Jedox Web |
50432 |
If an error occurs while submitting a request to Jedox Support in the Jedox Web contact form, this error is not always handled correctly, leading to the dialog not being usable anymore. |
Fixed |
21.2.5, 21.3.0 |
| Jedox Web |
50436 |
If a component in an Integrator project has a lot of dependencies, using the "Copy with dependencies" function for such a component doesn't always work correctly. |
Fixed |
22.3.0 |
| Jedox Web |
50693 |
In Jedox 21.2, assigning a variable for the attribute table in AFilter subset doesn't work correctly when saving the subset as a global subset. |
Fixed |
21.2.5, 21.3.0 |
| Jedox Web |
50713 |
Defining subjobs in a LoopParallel job doesn't work correctly in Jedox Integrator UI. |
Fixed |
21.3.0 |
| Jedox Web |
50948 |
After defining a filter on the outer dimension of a Jedox View which uses multiple dimensions in rows, expanding on an inner dimension doesn't work correctly. |
Fixed |
21.4.0 |
| Jedox Web |
51423 |
The display of values in charts exported from Jedox Web in an XLSX file is not correct if a number format with units is used. |
Fixed |
21.4.0 |
| Jedox Web |
51573 |
Opening the "Select Element" dialog on an PALO.ESELECT formula for the #_GROUP_ dimension doesn't work correctly in Jedox 21.3. |
Fixed |
21.3.3, 21.4.0 |
| Jedox Web |
51689 |
Interacting with a Combobox in a Canvas report from the Jedox Mobile app doesn't work as expected. |
Fixed |
21.2.2, 21.3.2, 22.1.0 |
| Jedox Web |
51689 |
Interacting with a Combobox in a Canvas report from the Jedox Mobile app doesn't work as expected. |
Fixed |
21.2.13, 21.3.6, 21.4.1, 22.1.0 |
| Jedox Web |
51780 |
Searching for an element in a dimension in Modeler doesn't work if the element name contains a slash character. |
Fixed |
21.4.8, 22.1.0 |
| Jedox Web |
51962 |
When sorting a Jedox View by data in a column, the icon to indicate sorting next to the element name is not shown in Jedox Web. |
Fixed |
22.2.0 |
| Jedox Web |
51990 |
Starting a Scheduler Task via a Macro in a Jedox Web report doesn't work correctly. Workaround: use the "Scheduler" Action on the form element to start the task instead. |
Fixed |
22.3.0 |
| Jedox Web |
52080 |
Passing values larger than 2147483647 to an Integrator Action via a parameter doesn't work correctly. |
Fixed |
22.2.0 |
| Jedox Web |
52190 |
When expanding or collapsing a DynaRange in a Canvas in 21.4, conditional formatting is not always applied correctly. |
Fixed |
22.2.0 |
| Jedox Web |
52191 |
When changing the selection of a Combobox that is linked to a DynaRange in a Canvas, the DynaRange result does not update accordingly. |
Fixed |
21.4.6, 22.1.0 |
| Jedox Web |
52297 |
Creating a Batch PDF of a Canvas Sheet via a Scheduler Task doesn't work correctly. |
Fixed |
21.4.1, 22.1.0 |
| Jedox Web |
52327 |
When expanding and collapsing elements in a View in a Canvas, zero values are sometimes not shown correctly. |
Fixed |
21.4.7, 22.1.0 |
| Jedox Web |
52726 |
When a View uses Zero Suppression, and a List is placed in the View, opening an element picker for one of the Views dimensions in the POV area leads to an error message. |
Fixed |
22.3.0 |
| Jedox Web |
52946 |
On Windows installations for Jedox 21.4, export of Drillthrough data as xlsx file does not work correctly. |
Fixed |
22.2.0 |
| Jedox Web |
53011 |
When scrolling down in the List of Rules for a cube in Modeler, and editing a specific rule, the rule list is automatically scrolled to the top again. |
Fixed |
22.1.0 |
| Jedox Web |
53060 |
Sorting a View alphabetically or by attribute doesn't work correctly if the View is shown inside of a Canvas. |
Fixed |
22.2.1, 22.3.0 |
| Jedox Web |
53087 |
In the Breadcrumb navigation in Jedox Web Designer and Reports, Models are not listed in alphabetic order. |
Fixed |
22.2.0 |
| Jedox Web |
53098 |
When setting a Studio Banner message, Jedox Web does not work properly in version 21.4.6. |
Fixed |
21.4.7, 22.2.0 |
| Jedox Web |
53374 |
When using the ampersand ("&") character while entering an attribute value in the Modeler, the character is not stored correctly. Workaround: enter the attribute value in a Jedox View for the respective attribute cube. |
Fixed |
21.4.10, 22.1.2, 22.2.0 |
| Jedox Web |
53681 |
When using the http backend option for Jedox Spreadsheet Server, the installation of some models from the Jedox Marketplace may fail. |
Fixed |
22.2.0 |
| Jedox Web |
53882 |
If a group homepage report or default homepage report is defined, and a user's Navigation tree in the "Reports" section is collapsed, the homepage report cannot be loaded correctly in Jedox 22.1. |
Fixed |
22.2.0 |
| Jedox Web |
54557 |
For specific Web reports, the XLSX Snapshot export is not working as expected, when using a Language other than "English (US)". Workaround: export the file while while using the "English (US)" locale. |
Fixed |
22.1.5, 22.2.2, 22.3.0 |
| Jedox Web |
54910 |
When using the Integrator Action, the "Recalculate after Action Execution" checkbox is not working as expected in Jedox 22.2. |
Fixed |
22.2.3, 22.3.0 |
| Jedox Web |
55213 |
SUCCESS charts of type Waterfall are not shown correctly in PDF exports of a Jedox Web report. |
Fixed |
22.3.0 |
| Jedox Web |
43917 |
If the execution time of an Integrator Job exceeds 24 hours, the Execution Monitor doesn't display the Job duration correctly. |
Fixed |
21.2.0 |
| Jedox Web |
43975 |
When creating a Batch task that is executed for a single user in versions older than 2019.3, and then, it is not possible to change the "Notifications" for this task anymore in scheduler UI. |
Fixed |
21.1.0 |
| Jedox Web |
44668 |
File icons do not appear in General tab of Properties dialog in the "Designer" panel of Jedox Web. |
Fixed |
21.2.0 |
| Jedox Web |
45107 |
When removing a dimension from a cube, existing Views on this cube do not show correct result directly. Workaround: open the "Edit View" dialog for this view, and paste it again. |
Fixed |
22.2.0 |
| Jedox Web |
45602 |
The default row height in a View Theme isn't correctly preserved after creating a new theme. |
Fixed |
21.4.0 |
| Jedox Web |
45623 |
Repeatedly creating new View themes in a running session in Jedox Web doesn't work correctly. |
Fixed |
21.4.0 |
| Jedox Web |
45701 |
Importing a View theme with the same name as an existing theme doesn't work correctly. |
Fixed |
21.3.0 |
| Jedox Web |
45790 |
Entries in Jedox Web History navigation for Mail Templates in Scheduler aren't set correctly. |
Fixed |
22.2.0 |
| Jedox Web |
46271 |
If a connection in Jedox Web uses uppercase characters in the connection name, it cannot be used correctly in Web spreadsheet dialogs. Workaround: change the connection name to use lowercase characters only. |
Fixed |
20.2.11, 20.3.13, 20.4.3, 21.1.0 |
| Jedox Web |
47551 |
When duplicating a function in a FieldTransform, changes to the duplicated function are also applied to the original function. Workaround: save the Integrator project before editing the duplicated function. |
Fixed |
21.1.0 |
| Jedox Web |
46514 |
When defining an Action as the target of a Hyperlink on a Chart, the action is executed twice. |
Fixed |
21.2.0 |
| Jedox Web |
46572 |
Spreadsheet cell comments have display issues. |
Fixed |
20.4.8, 21.1.9, 21.2.1, .0 |
| Jedox Web |
46589 |
When defining styles or number formats on List blocks in a database in which no element formats had been previously defined in modeler, the styles / number formats are not stored correctly. |
Fixed |
21.1.0 |
| Jedox Web |
47309 |
When creating new Lists from the Paste View dialog, and using a name for the List which is already used for a Dimension, the behavior is not correct. |
Fixed |
22.1.0 |
| Jedox Web |
47401 |
In some environments, when downloading very large database script files, cube / dimension as files, or database archive files in Modeler, the resulting file doesn't have the correct content due to insufficient memory. |
Fixed |
20.4.6, 21.1.0 |
| Jedox Web |
47411 |
When detaching a View using System database or user / group dimensions, the detached view shows errors in some scenarios. |
Fixed |
21.1.0 |
| Jedox Web |
47597 |
Overriding report variables via report hyperlinks doesn't work correctly in all scenarios in Jedox Web 20.4. |
Fixed |
20.4.4, 21.1.0 |
| Jedox Web |
47656 |
Parent element style "bold" of the element selectors in Paste Views can be lost when expanding row dimensions. |
Fixed |
22.1.7, 22.2.3, 22.3.0 |
| Jedox Web |
47785 |
Expanding a Paste View of dimensions with attribute names in Designer uses the element name instead of the attribute name. |
Fixed |
22.1.7, 22.2.3, 22.3.0 |
| Jedox Web |
47867 |
In Jedox Web 20.4, Planning Assistant, Cell Tracer, setting Holds, and Drillthrough are not working correctly on PALO.DATA*() cells outside of a View. |
Fixed |
20.4.2, 21.1.0 |
| Jedox Web |
47986 |
In some combinations of DynaRanges and the SUMIF() function, a Web report can return an error message. |
Fixed |
21.3.1, 21.4.0 |
| Jedox Web |
48768 |
Changing settings keys of type "boolean" (checkboxes) in Jedox Web Settings Manager doesn't always work correctly in Jedox 21.1. |
Fixed |
21.2.1, 21.3.0 |
| Jedox Web |
48825 |
Usage of variables in the "Run with options" method in Jedox Integrator doesn't work correctly in Jedox 21.1. |
Fixed |
21.1.1, 21.2.0 |
| Jedox Web |
48929 |
Opening Web reports in Jedox Mobile doesn't work correctly with Jedox 21.1. |
Fixed |
21.1.2, 21.2.0 |
| Jedox Web |
48930 |
Usage of SAML authentication doesn't work in Jedox Mobile with version 21.1. |
Fixed |
21.1.2, 21.2.0 |
| Jedox Web |
49294 |
When adding a tooltip to a Data Validation list, the tooltip is shown with transparent background in version. |
Fixed |
21.3.0 |
| Jedox Web |
40273 |
The dialog for defining a Group Homepage doesn't display scrollbars correctly. |
Fixed |
21.2.0 |
| Jedox Web |
40834 |
In the Subset Editor's Hierarchy tab, the Siblings option in a Cyclic list does not remain selected after saving the subset. |
Fixed |
21.1.0 |
| Jedox Web |
41135 |
Searching in a nested dimension in Modeler causes the following OLAP error: "Error while loading elements". |
Fixed |
21.1.0 |
| Jedox Web |
41494 |
Exporting rules which were created using the "KPI Calculation" business logic doesn't work correctly in Jedox Web Modeler. |
Fixed |
21.2.0 |
| Jedox Web |
41800 |
The Large Subset checkbox becomes deselected when switching from Formula to Subset and from Formula to ODBC query. |
Fixed |
21.2.0 |
| Jedox Web |
42296 |
Importing a workbook that has the same name as an existing one via drag and drop takes a long time if you opt out of replacing the existing document. |
Fixed |
21.2.0 |
| Jedox Web |
42866 |
In the UI for Jedox Integrator, when the browser is resized to a smaller size, some tabs overlap and the FlowGraph pane overlaps the Settings Panel. |
Fixed |
21.3.0 |
| Jedox Web |
43297 |
When uploading a file in Jedox Web Designer, which uses the same name as an existing file but a different character case for the file extension, a duplicate file is created. |
Fixed |
21.3.0 |
| Jedox Web |
43600 |
In Jedox Web Designer, when dimensions of the file selector are larger than the file thumbnail icon, the keyboard delete function does not work. |
Fixed |
21.4.0 |
| Jedox Web |
28985 |
Loading of large, highly nested dimensions sometimes takes too long in Jedox Web Modeler. |
Fixed |
21.1.0 |
| Linux Setup |
48826 |
On new Linux installations, when creating the first report in empty report group "Public Files", an error message is shown and the report can't be created.
Workaround: create a subdirectory in "Public Files". After that, report creation works as expected. |
Fixed |
21.2.0 |